13
QUICK START INSTRUCTIONS
Note to user: your device must be placed in therapy lockout mode by your health-
care professional before you can utilize the quick start feature.
Begin by following steps 1 and 2 in the Standard Operation Instructions section.
To use the device in Quick Start mode simply turn the device on by pressing the
ENTER/ON button.
You will now see the therapy status screen displayed. Your therapy protocol has
been pre-selected for you. Your therapy has begun. Use the “+” or “-“ buttons to
adjust the amplitude to the level recommended by your healthcare professional.
THERAPY STATUS SCREEN
TYPICAL DISPLAY SCREENS
SELECT
PROTOCOL
AMP. LOCK
PRESS
ENTER TO
UNLOCK
THERAPY
COMPLETE
A090 P12
TR 07
Amplitude Setting
(A setting of 90 equals 9 volts)
Therapy Set Number
(In this example Therapy Pre-Set is #12)
Battery Power Remaining
(In this example the battery is full)
Therapy Time Remaining
(In this example 7 minutes remain)
When this screen
is displayed,
scroll through
the 14 preset
therapy protocols
and press the ENTER button to select.
The two screens
to the left will
be displayed
alternately when
the amplitude is
locked for safety
reasons. Press
ENTER to unlock
the amplitude.
When the ampli-
tude is unlocked,
it will be at the previous setting.
This screen will
appear at the
end of a therapy.
