6 Questions? We’re here to help!
Visit: shopelitegourmet.com for support on this product.
BEFORE FIRST USE
1. Unpack the appliance and all parts. Remove all packaging
materials, including any stickers or labels.
2.
Before the first use, please check if all the parts of the
appliance are in good condition. If not, please contact the
seller or manufacturer.
3. Clean the interior surface of the coffee maker with a damp
cloth. Wipe dry with a soft cloth immediately. Do not use
abrasive materials. Wipe down the exterior with a soft dry
cloth.
4. NEVER IMMERSE APPLIANCE OR CORD IN WATER OR ANY
OTHER LIQUID.
5. Position the coffee maker on a stable, dry, level, heat-
resistant surface near an electrical outlet.
6. Unroll the electrical cord.
7. Operate the coffee maker on a separate outlet and circuit
from other appliances to avoid overloading the circuit.
8. It is recommended to run the coffee maker for one cycle
with just plain water and no coffee to clean the internal
parts of the coffee maker.
NOTE:
Once the coffee maker
starts the brewing it
will remain on until
the brewing cycle is
complete. To interrupt
or stop the brewing,
disconnect the plug
from the electrical
outlet.
Do not touch the
warming plate as it
is hot!
Do not touch the lid
during brewing.
After brewing cycle is
complete, wait a
minimum of 10
minutes before taking
out the filter basket to
avoid any injury from
hot steam.
Make sure the filter is
secured back in place
before beginning to
operate your
coffeemaker.
NOTE:
This coffee maker
comes with a reusable
mesh filter. A paper
filter can’t be used
in place of reusable
mesh filter.
HOW TO USE
1. Make sure all parts are dry and that the unit is not plugged
into an electrical outlet while filling with water and coffee
grounds.
2. Pour in 14oz water into the water tank.
3.
Open the lid and take out the filter. Put three tablespoons
of finely ground coffee or four tablespoons of regular
ground coffee into the filter and distribute it evenly.
4.
Reinstall the filter into the filter basket and place the filter
basket into the brewing chamber.
5. Close the water tank lid.
6. Put the mug without the lid onto the base
7. Plug the coffee maker into an electric outlet and Press the
start button - the indicator light will turn on.
8. When the coffee is ready, the indicator light will turn off.
9. Allow all the hot coffee to drip from the brewing chamber
into the mug before removing the mug.
-
-
-
-
-
Caution:
S
calding may occur by open the water tank lid during
the brewing.
