Linux DVR System
4.7.
Date Setup
Date Setup is a menu to set correct time when the date of time of system is incorrect.
When time is newly set, all of the stored data are deleted. Basic setup is current time
of the system.
①
When cursor is moved to date setup among general setup menu, yellow light is lit
to the date setup. For the move of cursor, ▲/▼button among Direction
Movement buttons is used. ▲button moves the position of cursor upward. ▼
button moves the position of cursor downward.
②
When pressing ▶button among Direction Movement buttons, yellow light is lit
around the rim of selection window that shows present setup value at right side of
the date menu, and cursor is generated in the year.
2003
③ Year can be changed using ▲/▼button among Direction
Movement buttons. pressing ▲button increases the number
and pressing ▼button decreases the number.
④ Move cursor to the place intended to change among the year, month, date, hours
and minutes. Use ◀/▶button among direction buttons for the move of cursor. ◀
button moves cursor to the left and ▶button moves cursor to the right. ▲/▼button
among the direction buttons is also used for the move of value. Pressing ▲button
increases the number and pressing ▼button decreases the number.
⑤ After the completion of setup, when the
change of date is intended by pressing
ENTER
button,
following
message
appears. Place cursor on ‘Confirmation’
and press ENTER button once again to
move to next message.
⑥ If following message appears, press
ENTER button once again to change
date, and execute rebooting.
LeadTech
６１