Linux DVR System
④
When selection is completed between MOTION/SENSOR, move the cursor to event
search date setting window by pressing
▶
button located on the front side of ELiSS. In
date setting window,
◀
/
▶
button among Direction Movement buttons is used for the
movement of cursor.
▲
/
▼
button among Direction Movement buttons is used for
change of number.
⑤
When search time/date setting is completed, press ENTER button located on the front
side of ELiSS. If searched data exist, the data are shown in the form of list. Move cursor
to desired data using
▲
/
▼
button among Direction Movement buttons. Move of cursor is
displayed in red color. Selected data is regenerated when pressing ENTER button on
the front side of ELiSS.
3.3.3. Regeneration of Event-Searched Data
After designating one in event searched data list, when you press ENTER button located on
the front side of ELiSS, the screen moves to data regeneration screen.
3.3.4. Data Regeneration Screen
Same as general data regeneration screen.
(Refer to ‘3.2.3. Data Regeneration’).
Data
regeneration function button also has same function as in general search regeneration.
(Refer to 3.2.7 Regeneration Function)
3.3.5. Search of Other Date from Event Search Screen
When you want to search on other date during
the search of recorded data, press ENTER
button on front side of ELiSS. Then camera date
selection screen for event search appears.
Method of selection is same as Camera
Selection/Date Selection method as explained in
‘3.2.1. Event Search’.
LeadTech
３７