22
23
CIM3702X
GB
OPERATION AND MAINTENANCE
CONTROL PANEL
Control panel: Easy-to-use touch screen with easy-read display.
a) Water indicator
b) Ice indicator
c) Power indicator
d) On/Off button
e/f) display of selected ice cube size (S = small/L = large)
g) selection of ice cube size
UNPACKING THE ICE MAKER
1. Remove all packaging material (inside and on the outside of the appliance).
Make sure the ice box and ice shovel have been delivered (these will be inside
the appliance). Contact your dealer if any components are missing.
2. Remove the tape holding the ice paddle, ice box and ice shovel. Clean the tank
and ice box.
3. Place the ice maker on a flat kitchen worktop out of direct sunlight and away from
other heat sources (i.e. oven, hob rings, radiators etc.). Make sure there is a clearance
of at least 10 cm between the rear, left and right sides of the appliance and a wall.
4. Wait for a while before plugging the ice maker into the power supply (this will give the
refrigerant chance to settle).
5. Position the appliance so that you can always get access to its plug.