www.elinz.com.au / [email protected] / 1300 881 773
•
Do not expose the product to direct sunlight or intense light
. The lens or internal
circuitry may fail otherwise
•
Do not apply excessive force when pressing the buttons.
Doing so may damage the
buttons
•
Do not use chemical cleaners or solvents to clean the product.
Doing so may
damage plastic components of the product. Clean the product using a clean, soft, and
dry fabric.
•
Do not disassemble the product or subject the product to impact
. Doing so may
damage the product. Unauthorized disassembly of the product voids the product
warranty
•
Handle with care.
If you drop, mishandle, or expose the product to external shocks,
it may cause damage and/or result in the malfunction of the product.
• Do not attempt to insert foreign objects into the device
•
Avoid excessive humidity and do not allow any water to enter the product.
Electronic components inside the product may fail if exposed to humidity or water.
•
Use the product at a temperature between 14°F and 140°F (-10°C to 60°C) and store
the product at a temperature between -4°F and 158°F (-20°C to 70°C).
The product
may not function as designed and some permanent physical damages may result if it
is operated or stored out of the specified temperature ranges. Such damages are not
covered by the warranty
•
This device is intended to be used inside the vehicle only.
Install this device in a
location where it has unobstructed view of the road but does not interfere with the
driver's view. Please check your local and regional law before mounting to windshield.
