www.elinz.com.au / [email protected] / 1300 881 773
1.
Please read the set-up and usage instructions carefully before operation.
2. You should not set/install this dash camera at a place that would obstruct or reduce
a driver’s view. Make sure your usage complies with
pertinent vehicle codes of your
state, province, territory or country.
3. You should post the required notices of recordation to occupants inside the vehicle,
if voices or other information/signal pertaining to in-vehicle activities will be recorded.
4.
You should not change the dash cam’s setting or mode of operation when the
vehicle is in motion.
5. You should not leave the dash cam in a visible spot when no one is inside the vehicle,
to avoid attracting break-ins to steal the unit or other property.
6. You should avoid extended exposure of the dash cam to direct sunlight or extreme
temperatures (either high or low temperature) which tend to degrade or damage the
unit and its normal functionality.
7. You should examine, check and verify the dash cam at least every 6 months,
including the memory card, to ensure the video reception and recording are working
properly. For each use, you should verify that the dash cam unit, the visible lights and
the audible sounds are working normally. If there are signs of non-operation or
malfunction, you should immediately seek to replace the product and check to see if
the product is covered under any applicable warranty.
8. The dash cam unit may have additional functionality, such as transmission and
recordation of audible or GPS signal or other identification information. If you have
privacy concerns about these functions, make sure you follow the instruction to
disable these functions.
9. You should use the dash cam unit in the way it is intended. You should not use the
dash cam unit in a way that would be illegal or that tends to physically damage the
unit, or tend to cause danger to the safe operation of the vehicle or the occupants.
10. THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE DRIVING.
