Operation Manual of P T Z Dome Camera
23
2.8.1 Clear Memory
[1].Joystick Up/Down to move the cursor to select Clear Memory.
[2].Joystick Left/Right or press OPEN to enter.
[3].Press OPEN to Clear Memory or press CLOSE to cancel.
2.8.2 Restore Def Setting
[1].Joystick Up/Down to move the cursor to select Restore Def Setting.
[2].Joystick Left/Right or press OPEN to enter.
[3].Press OPEN to Restore Def Setting or press CLOSE to cancel.
2.8.3 Color System
[1].Joystick Up/Down to move the cursor to select Color System.
[2].Joystick Left/Right to select the PAL or NTSC.
2.8.4 Dome Reset
[1].Joystick Up/Down to move the cursor to select Dome Reset.
[2].Joystick Left/Right or press OPEN to reset the dome.
2.8.5 IR Module Setup
[1].Joystick Up/Down to move the cursor to IR CONTROL.
[2].Joystick Left/Right to select the IR control AUTO/ON/OFF.
[3].Joystick Up/Down to move the cursor to IR SW DELAY.
[4].Joystick Left/Right to select the IR Switch delay 5SEC/10SEC/15SEC/30SEC/45SEC.
ARE YOU SURE TO DO THIS
IRIS OPEN TO CONFIRM
IRIS CLOSE TO CANCEL
PLEASE WAIT...
Press
OPEN
ARE YOU SURE TO DO THIS
IRIS OPEN TO CONFIRM
IRIS CLOSE TO CANCEL
PLEASE WAIT...
Press
OPEN
IR MODULE SETUP
1 IR CONTROL AUTO
2 IR SW DELAY 10SEC
