ERROR MANAGEMENT
EL-SKYPORT TRANSMITTER SPEED
FREQUENCY CHANNEL
is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
Elinchrom LTD - ELB 400 - Made in Switzerland - 01.2015 (73036)
Elinchrom LTD - ELB 400 - Made in Switzerland
Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: [email protected]
www.elinchrom.com
Quick Start Guide
Frequency
channel selector
MODE switch
GROUP switch
RX feature button
Power decrease
RX feature button
power increase or
modelling lamp toggle
Flash test / flash mode /
configuration button
Flexible swivel
antenna 360
Status LED
ELB 400
EL-ENTERPRISE APP FOR iOS
Please download our corporate
iOS
™
App on App Store
™
:
http://bc.gs/14
Please check all security documents before use !
at this link:
http://bc.gs/32
DOWNLOAD THE ELB 400 USER GUIDE
Please get the complete user guide
DOWNLOAD CONFORMITY
Please find the declaration for EC
conformity and USA & Canada
conformity on the Elinchrom website.
http://bc.gs/ec
™
ERROR
NUMBER
DESCRIPTION
SOLUTION
1
2
3
4
11
15
60
61
Wait until the unit has cooled down.
The unit will switch back to the
normal operation as soon as the
temperature decreases to a normal
working level.
Switch the unit off, wait 2 minutes
and switch the unit on again. If the
error shows up again the battery
requires a check up at an authorized
Elinchrom service centre.
Switch the unit off, wait 2 minutes
and switch the unit on again. If the
error shows up again the unit
requires a check up at an authorized
Elinchrom service centre.
The unit has detected a mains
supply fault. Please check the
mains/battery supply. It could be
not working correctly.
Capacitor over voltage
System over heat
Discharge timeout error
Charge timeout error
Battery low
Temperature sensor error
Communication bus error
Battery unseal error
90
Safety stop system (generic error)
