background image

36

37

model no. 011-2014-0  |  contact us 1-877-619-6321

PROBLEM

POSSIBLE CAUSE

SOLUTION

The audio systems 
and radios produce a 
buzzing sound when 
powered by the 
power pack.

The power supply in audio 
system does not adequately 
filter the modified sine wave 
generated by the power 
pack.

Use sound system with high 
quality filter.

BUZZING IN AUDIO SYSTEMS AND RADIOS

TROUBLESHOO

TING

TROUBLESHOO

TING

PROBLEM

POSSIBLE CAUSE

SOLUTION

The run time for  
appliance is less 
than operating limit.

•   The internal battery is 

not fully charged.

•   Recharge the power pack 

using the AC charger until the 
charging status LED indicator 
glows green.

•   The power consumption 

of the AC appliance is 
higher than operating 
limit.

•   Check the power or wattage 

rating of the AC appliance 
(or current draw for 12 V DC 
appliances).

PROBLEM

POSSIBLE CAUSE

SOLUTION

Lines scroll across 
the TV screen.

The power pack operation 
affects the TV signal  
reception.

•   Increase the distance between 

the power pack and the TV, 
antenna and cables.

•   Adjust the orientation of power 

pack, TV, antenna and cables.

•   Increase the TV signal strength 

by using a better antenna and a 
shielded antenna cable.

•   Try a different model. The models 

may vary considerable in their 
susceptibility to interference.

TELEVISION INTERFERENCE

WARNING!

•   Do not disassemble the power pack, as it does not contain user-serviceable 

parts.

•   Have the power pack serviced by a qualified technician. Attempting to service 

the power pack by yourself could result in electric shock or burn

 

NOTE:

If the above solutions do not eliminate the problem, contact 1-877-619-6321 for 
assistance between 9:00am to 5:00pm PST, Monday through Friday.

Содержание 011-2014-0






















Отзывы: