2. To activate Blackout tap the UP or DOWN buttons until Yes is displayed, press ENTER to confim
and exit. The fixture will now be in Blackout mode. To deactivate Blackout mode, select No and
press Enter.
LED -
With this function you can switch the lamp on or off via the control board.
1. Tap the either the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or DOWN buttons to select “
ON
” to switch
on the LED, or “
OFF
” to switch off the LED.
3. Press ENTER to confirm and exit.
I DSP
-
This function will reverse the display 180º.
1. Tap the either the MENU button until “
I DSP
” is displayed, press ENTER.
2. Tap the UP button until “
FLIP
” is displayed.
3. Press ENTER, the display will show “
ON/OFF
”.
4. Press the UP button to select “
ON
” to activate this function, or “
OFF
” to deactivate this function.
5. Press ENTER to confirm.
FHRS
- With this function you can display the running time of the unit.
1. Tap the either the MENU button until “
FHRS
” is displayed, press ENTER.
2. The display shows the running time of the unit. Press MENU to exit.
VER
- Use this function to display the Software version of the unit.
1. Tap the either the MENU button until “
VER
” is displayed, press ENTER.
2. The display will show the software version.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
