ADDR -
DMX Address Setting
.
1. Tap the either the MENU, UP, or DOWN buttons until “
ADDR
” is displayed, press ENTER.
2. “
1
” will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address. Press ENTER to set your desired DMX address.
CHND -
There are 6 DMX Channel modes to choose from, this will let you switch and select
your DMX Channel mode. You can choose from either 1, 2, 3, 4, 6, or 7 DMX Channels. Please
see the last page of the DMX values and traits for each DMX Channel Mode.
1. Tap the either the MENU button until “
CHND
” is displayed, press ENTER.
2. Tap the UP or DOWN buttons to scroll through the different DMX Channel modes. Once you have
found your desired DMX Channel mode press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a master/slave configuration.
1. Tap the either the MENU button until “
SLND
” is displayed, press ENTER. “
MSTR
”, “
SL 1
” or “
SL 2
” will
be displayed.
2. Tap the UP or DOWN buttons until your desired setting is displayed, press ENTER to confim and
exit.
SHND -
in this mode you can choose and run one of 11 preprogrammed shows.
1. Tap the either the MENU button until “
SHND
” is displayed, press ENTER.
2. Tap the UP or DOWN buttons to scroll through 11 preprogrammed shows.
3. Select your desired show by pressing the ENTER button to confirm and exit.
DIMM -
in this mode you can set the brightness/intensity of the fixture.
1. Tap the either the MENU button until “
DIMM
” is displayed, press ENTER.
2. Tap the UP or DOWN buttons to adjust the brightness (0-255). A setting of 0 will not produce any
light output
3. Select your desired intensity by pressing the ENTER button to confirm and exit.
STRO -
in this mode you can activate and set the strobe rate.
1. Tap the either the MENU button until “
STRO
” is displayed, press ENTER.
2. Tap the UP or DOWN buttons to adjust the stobe rate (0-255). A setting of 0 will deactivate the
strobe feature.
3. Select your desired strobe rate by pressing the ENTER button to confirm and exit.
BLND -
Blackout or Stand by mode.
1. Tap the either the MENU button until “
BLND
” is displayed, press ENTER. Either Yes or No will be
displayed.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
