ELICA NIKOLA TESLA FLAME, Инструкция по монтажу и эксплуатации, Страница: 66 / 387

65
EN - Instruction on mounting and use
Strictly observe the instructions in this manual. All liability
is declined for any problems, damage or fires caused by
failure to comply with the instructions in this manual. The
device is intended for domestic use only, to cook food
and extract the fumes generated by cooking. No other
use is allowed (e.g. heating rooms). The manufacturer
declines any liability for inappropriate use or incorrect
control settings.The device may have different
aesthetic features with respect to the illustrations in
this handbook, however the operating, maintenance
and installation instructions remain the same.
Read the instructions carefully: they include important
information about installation, use and safety.
Do not make electrical changes to the device.
Before installing the device, make sure that none of the
components are damaged. Otherwise, contact the dealer
and do not continue with the installation.
Check that the device is intact before continuing with
installation. Otherwise, contact the dealer and do not
continue with the installation.
Note: The parts marked with the symbol "(*)" are optional
accessories supplied only with some models or otherwise not
supplied, but available for purchase.
1. Warnings
Warning! Strictly observe the following
instructions:
●
Before installation, make
sure that the local distribution conditions
(the gas type and pressure) and
equipment adjustment are compatible.
●
The device must be installed and
connected in compliance with current
installation regulations in the country of
destination/use. Special precautions
must be taken with respect to ventilation
requirements of the premises in which
the device to be installed.
●
This device
is a class 3 recessed device.
●
The
instructions are only valid for countries
whose symbols are indicated on the
serial number plate.
●
The device is
intended for non-professional use in the
home.
●
Do not allow the power cable for
the device in question and for other
electrical appliances to come into contact
with the hot surfaces.
●
Do not obstruct
the openings for ventilation and heat
dispersion.
●
In the event of a fault,
never access the internal mechanisms to
try to repair them. Contact technical
support.
●
Make sure that the handles of
pans are always facing towards the
inside of the hob to avoid accidentally
knocking them.
●
Do not use unstable or
deformed pans.
●
The device must be
disconnected from the electrical supply
before performing any installation work.
●
If the power cable is damaged, it must be
replaced by the manufacturer or by the
authorised technical support service or
by a technician with a similar qualification
to avoid any risks.
●
Installation or
maintenance must be performed by a
qualified technician, in compliance with
the manufacturer's instructions and local
safety regulations. Do not repair or
replace any part of the device unless
specifically stated in the operating
manual.
●
Earthing the device is
compulsory.
●
In order for the installation
to comply with current safety regulations,
a compliant omnipolar switch is required
that guarantees the complete
disconnection of the mains in category III
overvoltage conditions, in accordance
with the installation rules.
●
Do not use
power strips or extension cords.
●
Once
installation is complete, the electrical
components must no longer be
accessible by the user.
●
The device and
its accessible parts get hot during use.