ELGO Electronic GMIX1A Series, Руководство по эксплуатации

Страница: 21 / 24

Type Designation
- 21 -
10 Type Designation
NOTE
When ordering, please use the here described ordering code (Type Designation). Options
that are not required are filled in with „-„.
10.1 Accessories
Table 9: Accessories
Order Designation Description
MB20-50-10-1-R-XX.X* Magnetic tape with 5 mm pole pitch
*) please indicate length in XX.X m
10 mm end cap set 2 end caps (10 mm) for magnetic tape. Two M3 screws included. Additional fixa-
tion in the radial and linear range to protect the ends of the magnetic tape.
FS1000, FS1500 or
FS2000 Guide rail for magnetic tape (length: 1.0 m, 1.5 m and max. 2.0 m available).
For longer measuring lengths the rails can be lined up together.
FW2060 Guide carriage for sensor head as ideal supplement to FS guide rails. The carriage
is made of special sliding plastic. Dimensions L x W x H = 80 x 48 x 24 mm.
AP-00-XX** Aluminium cover-profile for magnetic tapes (as alternative to the cover tape).
**) AP-00-1m = 1m long / AP-00-2m = 2 m long
POSU Pole finder card 85 x 55 mm
GMIX1A 01.5 X XX
Series/Type:
GMIX1A - Magnetic Linear Encoder
Version:
000 = standard version
001 = 1. special version
002 = 2. special version etc.
Signal cable length:
01.5 = 1.5 m (standard length)
others on request
Resolution:
1 = 0.1 mm
2 = 0.05 mm
3 = 0.025 mm
4 = 0.02 mm
5 = 0,01 mm
Power supply / output level:
00 = 10 … 30 VDC / HTL
01 = 10 … 30 VDC / TTL
000 - - - -