Elgento E22005, Руководство по безопасности и инструкция

Страница: 5 / 12

5 www.elgento.co
HIGH VOLTAGE HOT SURFACE
• The iron should always be
turned to “Min” before plugging
or unplugging from the mains
outlet. Never pull the cord to
disconnect from the mains:
instead, grasp plug and pull to
disconnect.
• DO NOT leave the iron
unattended when connected
to the mains or on an ironing
board.
• DO NOT touch hot metal parts,
especially the soleplate to avoid
injury as burns may occur.
• The iron is not to be used if it
has been dropped, or if there
are visible signs of damage.
• When placing the iron on a
stand, ensure that the surface
on which the stand is placed is
stable.
• DO NOT place the iron on an
unprotected surface.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the Customer
Support Team.