4
1.
INTRODUCTION
This Configuration guide has been prepared to illustrate best practice when configuring PURELAB
Chorus. Please adhere to the following safety instructions.
2.
HEALTH & SAFETY
WARNING!
WARNINGS ARE GIVEN WHERE FAILING TO
OBSERVE THE INSTRUCTIONS COULD RESULT IN
INJURY OR FATALITY.
CAUTION!
Cautions are given where failure to observe the
instructions could result in damage to the
equipment, associated equipment and processes.
Environment
CAUTION!
Clean dry indoor. Temp 5-40°C.
Humidity max 80% non-condensing.
Failure to follow the environmental specification
could result in damage to the system.
PURELAB Chorus is not designed for use in fume
cupboards where chemicals could damage the
system.
Halo Dispense
CAUTION!
The Halo Flexible Dispense handset is not
designed to be submersed in water.
Electricity
The appliance coupler (mains lead) or power supply connected to the rear of the unit can be
removed to isolate the power supply. If access to this is restricted then it is recommended that
access to the supply socket is easily available to disconnect the electrical supply.
WARNING!
ONLY USE THE APPLIANCE COUPLER (MAINS
LEAD), POWER SUPPLY AND COMMUNICATIONS
LEADS PROVIDED.
THE USE OF THESE WILL ENSURE ADEQUATE
EARTH PROTECTION IS PROVIDED.
IF THE EQUIPMENT IS USED IN A MANNER NOT
SPECIFIED BY ELGA, THE PROTECTION PROVIDED
BY THE EQUIPMENT MAY BE IMPAIRED
POSITION THE POWER SUPPLY SO THAT IT
CANNOT COME INTO CONTACT WITH WATER.
