http://www.elfinx.com
5
Remote Control Operation
Active Pager Operations on Remote
This DUAL-LINK paging remote keeps you in control with instant signals and actions in response to events
threatening your vehicle.
1.
Arming
When all doors are closed, press button to arm the vehicle and lock the doors. The siren then
chirps once and the lights flash once. After about 8 seconds, the LED starts flashing.
NOTE:
In the event that the vehicle is bumped within 3 seconds just after the button is
pressed, the system will delay entering into arming mode until the bumping disappears.
2.
Disarming
Press button to disarm the vehicle and unlock the doors. The siren then chirps twice, the
lights flash twice, and the LED stops flashing.
NOTE:
If the siren chirps more than 2 times, it indicates the system has been activated. Please
refer to
section: System Operation - Alarm Memory Mode on for details.
3.
Auto-Arming
If no door is opened within approximately
25 seconds after disarming, the vehicle will automatically return
to arming mode again. Therefore, if you need to work for a longer time while the vehicle is in disarming
mode, it is suggested to open any of the doors after disarming, thus suspend the auto re-arm function.
4.
Open Trunk (option)
Press to
open trunk under any condition.
5.
Silent Alarm Mode
Turning ON the Silent Alarm Mode:
Press +
for 1 second, the speaker icon
is changed to
. All chirp sounds from
normal operations as well as alarm sounds triggered by shock sensing will be turned off.
However, the alarm will still be active if any of the doors is opened or engine is started
illegally and also remote will beep as well.
Turning OFF the Silent Alarm Mode:
Press +
for 1 second again, the speaker icon
returns.
6.
Vehicle Status Function
Under Arming status, press , lights flashing twice and you can view the vehicle status on Remote Control
display and also ‘Beep’ from Remote Control. You can also use this function as panic to find your vehicle
under dark area.
