ElfinX FSK-6000 Скачать руководство пользователя

Страница: 3 / 9

http://www.elfinx.com

System Installation Guide

Main Unit Installation

The main unit is placed under the vehicle control panel. After fixing the main unit in a suitable place, start

connecting all the wiring according to the Wire Connection Diagram. Before putting back all the OEM parts,

simply test the system functions first. The main unit must be fixing tight

Shock Sensor Installation

Install the shock sensor after fixing the main unit. It is recommended to place the shock sensor near the doors for

easy detection of any intrusions. To adjust the sensitivity of the shock sensor, simply use a screw to turn the knob

on the shock sensor, turning right to set a higher sensitivity or vice verse. Then test the sensitivity by triggering the

shock sensor.

NOTE:

Please do not hit the shock sensor directly.

Antenna Position

The ideal position for the antenna is in the top corner of the front windscreen right up of the wheel side. Please

keep the antenna free from any obstructions to prevent reception interference.

NOTE:

If the vehicle is parked in urban area with many buildings around, or under a strong electric field

environment, the reception will be affected.

Содержание FSK-6000









