Elfa BUGEG95WCD, Инструкция по установке и эксплуатации

Страница: 19 / 19

Ovens with facility to lower grill for cleaning purposes
1 Warning:ensure that all controls are in the“OFF”position and wait the grill
elementcooling.
2 Support the front of the grill element while you remove the knurled screw
retaining the element.
3 Lower the front of the element carefully to the rest position.
4 When cleaning the oven make sure do not apply any forces to the grill element
5 When the cleaning is complete, carefully remove any cleaning chemicals and
water from the grill element.
6 Carefully raise the front of the element into position and secure with the
knurled screw.
NEVER USE THE OVEN WITH THE GRILL ELEMENT HANGING DOWN!
Important. In case of burners removal for cleaning purposes, we recommend to make sure that all parts are
correctly positioned before igniting the burners again.
THE GRIDS OF THE COOKING PLANE ARE EQUIPPED WITH SUITABLE RUBBER PADS, ITS
PURPOSE IS BOTH PROVIDING BETTER STABILITY AND AVOIDING SCRATCHES ON THE PLANE
SURFACES DURING USAGE.
Cleaning the oven door
Unhooking the doors.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method
according to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on
the clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
Replacing the oven bulb
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always
remember to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the
oven after replacing the bulb.
F
18
AFTER A POSSIBLE GRID REMOVAL FOR CLEANING AND/OR MAINTE-NANCE NEEDS,WE
RECOMMEND TO VERIFY THE PRESENCE OF SUCH RUBBER PADS AND TO PUT THE GRIDS
BACK IN THEIR ORIGINAL POSITION.