claros pico user manual V 2.1
page 25 of 34
9
Maintenance
The device must undergo a technical safety inspection once a year together with these instructions for use and the
relevant medical products log. This may only be performed by individuals who are able to perform inspections
correctly based on their training, knowledge and experience gained through practical application and who can
perform inspections without supervision. Time period: once a year
1.
Radiation output test in all application modes
2.
General functional test
3.
General visual inspection
4.
Safety concept test in accordance with "claros pico testing" operating instructions in force
If the device does not undergo this inspection on schedule, elexxion AG cannot guarantee unrestricted operating
safety. Any warranty and liability claims on the part of the manufacturer shall also expire. All maintenance work
must be performed by providers that have been authorised by elexxion AG to maintain the device type in question.
Authorised maintenance providers:
elexxion AG | Otto-Hahn-Straße 7 | 78224 Singen, Germany
Tel. +49 7731-90733-0 | Fax +49 7731-90733-55
E-mail: [email protected].
Contact information can also be found on the website at www.elexxion.com
10
Service life
The claros pico system and accessories have a service life of at least 10 years when used in accordance with their
intended use, when subject to proper care and maintenance and when requirements with regard to technical safety
inspections are observed. The rechargeable battery has a limited service life of up to 2 years or 500 charging cycles.
If you have any queries, please contact the manufacturer. If you identify any malfunctions or damage, stop using the
device immediately and notify the manufacturer.
! PLEASE NOTE
! ATTENTION
