4
www.levelmount.com
1-888-229-1459
EU: +0044 844 567 2657
UK: 0844 567 2657
©2011 Level Mount - Patents Pending
This Desktop Mount was designed specifically to hold 10” – 30” (25.4cm – 76.2cm) Flat Panel
Monitors and a maximum weight of up to 35 lbs (16kg). Using this product with a Flat Panel Monitor
heavier than the maximum weight, or that exceeds these dimensions, may result in serious personal
injury and damage to equipment and property.
!
CAUTION!
Getting Started
1. Do not begin the installation of the Desktop Mount until you have read and understood the instructions and
warnings contained in these Installation Instructions. Failure to read, thoroughly understand and follow the
instructions can result in serious personal injury and damage to equipment and property. It is the installer’s
responsibility to make sure all components are properly assembled and installed using the instructions provided.
2. If you have questions that do not appear to be covered in these Installation Instructions, please contact us as
described under the “Need Help” section above. If you are at all unsure about any step in these instructions or
your ability to install the Desktop Mount safely and securely, you should seek professional help from a qualified
contractor.
3. This Desktop Mount contains small items that could be a hazard if swallowed. Keep these items away from
children.
4. Under no circumstances may the Desktop Mount be used outdoors. Use of this product outdoors could lead to
product failure and may result in serious personal injury, or damage to equipment and property.
5. The Desktop Mount must be attached to a desk top only as specified in these Installation Instructions. Do not use
the Desktop Mount for devices other than as specified in these instructions.
6. Make sure all screws and bolts are tightened before allowing the Desktop Mount to bear the full weight of the Flat
Panel Monitor. Tighten screws and bolts firmly but do not over-tighten them. Once the screw is flush against the
Flat Panel Monitor and the screwdriver is more difficult to turn and will not turn farther, stop; otherwise there is
a risk of over-tightening the bolt. Over-tightening the screws or bolts could damage the Desktop Mount, greatly
reducing its holding power. Periodic tightening may be required.
7. Screws should easily and completely thread into the Flat Panel Monitor mounting holes. If any of the screws
provided are not suitable for the Desktop Mount system, the installer must not under any circumstances drill holes
into the Flat Panel Monitor or into the Desktop Mount components. Using screws of improper size can damage
the Flat Panel Monitor.
8. Do not lift more weight than you can handle. If necessary, use at least two people when lifting and positioning the
Flat Panel Monitor on the Desktop Mount.
9. Before installing, check to make sure all parts of the Desktop Mount indicated in these Installation Instructions
are included and undamaged. Never use damaged parts or try to install the Desktop Mount if you do not have all
needed parts.
10. It is the installer’s responsibility to select the appropriate installation location and the supporting surface on which
to mount this Desktop Mount and to ensure that the Desktop Mount is anchored properly to the Desktop. It is also
the installer’s responsibility to ensure that the Flat Panel Monitor is properly and securely attached to the Desktop
Mount using only the enclosed fasteners and components and to verify that the screws and power cords do not
touch wires, pipes, or metal parts (since this could cause damage to these items or cause electrical shock).
11. Level Mount.has made every effort to make these Installation Instructions accurate and complete. However,
Level Mount makes no claim that the information contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection with the installation, assembly or use of this product.
Level Mount makes no representation or warranty, express or implied, regarding the accuracy, completeness or
sufficiency of the information contained in this document. Level Mount is not responsible for any damage or injury
caused by incorrect mounting, assembly, installation or use.
