11
-
The personnel must not perform under their own initiative operations or interventions that lie
outside their competence.
-
The personnel are obliged to notify their superiors of any problem or dangerous situation that
may arise.
-
The machine has been commissioned and tested with all the parts included within the
standard equipment. The installation of parts or other makes or modifications to the machine
may vary its characteristics and compromise its operating safety.
-
The machine must only be used for the purpose for which it was constructed.
2.2 SAFETY SIGNS (Symbols)
During construction of the machine, all the possible solutions for safeguarding the operator have
been adopted. The machine may nevertheless present ulterior residual risks which it has not been
possible to eliminate completely under certain operating conditions. This risks have been highlighted
on the machine with adhesive warning symbols that indicate the various situations if reduced safety
or danger.
ATTENTION
Keep the safety stickers clean and replace them immediately if they are peeling away or
damaged.
The following warnings refer to Figure 3. Read them carefully and learn their meaning.
1. Excessive voltage. Before interventions, disconnect power.
2. Toxic substance, if swallowed. Do not inhale the vapors.
3. Easily flammable.
4. Corrosive liquid when in touch with body members.
5. Attention, electrostatic discharge sensitive device.
6. Flammable. Do not approach free flames.
7. Use protection glass.
8. Use protection mask for respiratory tract.
9. Use protection gloves.
10. Before using the machine, read the operating instructions carefully.
11. Attention, do not turn the handle knob while the flames are lit.
FIG. 3
–
SAFETY SIGNS
