Elettrobar Niagara 281, Инструкция по эксплуатации

Страница: 7 / 110

INSTRUCTION MANUAL FOR DISHWASHERS
7
GB
4.6 Removal of integral filter
1. Turn off the machine.
2. Place the wash and rinse arms at a right angle to the edge
of the door (
Fig. 5
).
3. Raise each semi-filter, grasping it by the handle.
4.7 Emptying the machine
4.7.1 Machine without drain pump
¾
Turn off the machine.
¾
Remove the integral filter ( Fig. 5 ).
¾
Extract the overflow by pulling upwards ( Fig. 6 B ), and wait for the tub to drain
completely.
If necessary, extract the tub filter and clean (
Fig. 6 C ).
4.7.2 Machine with drain pump
¾
With the machine on ( Fig. 7 ), press the PROGRAMME SELECTION button (2)
until the DRAIN CYCLE indicator light (5) comes on.
¾ Remove the integral filter(
Fig. 5
).
¾ Extract the overflow (
Fig. 6 B
).
¾ Press the START button (3) . Machine draining starts and the indicator light flashes.
¾
The machine turns off at the end.
If necessary, extract the tub filter and clean ( Fig. 6 C ).
4.8 End of service
•
At the end of the day always drain the machine as described in the “Machine draining” section.
•
Disconnect the power supply by means of the main switch and close the external water
cock.
•
Perform routine maintenance and clean the machine as described in the “Maintenance” section.
•
If possible, leave the door ajar to prevent the formation of unpleasant smells inside.