Eletech DM2218C Скачать руководство пользователя страница 7

DM2218C / EM2218C User’s Manual  -  Page 7 of 8

Application Examples

Using Normally Open Push Buttons

1. Play without interruption.

Intended Operation

- Press button #1 to play file #001 once.
- Press button #2 to play file #002 once.
- When playing, pressing any button has no effect.

Required Text in MODE.TXT

None, this is the default mode (DN).

Notes

- The button can be released or held down when playing.
- If the button is held down at the end of the sound, the  sound

will be played again.

- If both buttons are pressed or held down at the same time,

button #1 prevails.

2. Allow interruption during playback.

Intended Operation

- Press button #1 to play file #001 once.
- Press button #2 to play file #002 once.
- Playing can be interrupted by pressing any other button.

Required Text in MODE.TXT

D

I

Notes

- When playing, pressing the same button again has no

effect.

3. Play the sound only once even if the button is held down.

Intended Operation

- Press button #1 to play file #001.
- Press button #2 to play file #002.
- Don’t repeat the sound even if the button is held down.

Required Text in MODE.TXT

DS
N001=F001,J888
N002=F002,J888
H888=J888
END

Notes

- The system will stay in the “H888=J888” endless loop for as

long as the button is held down.

4. Play only when the button is held down.

Intended Operation

- Press & hold button #1 to play file #001.
- Press & hold button #2 to play file #002.

Required Text in MODE.TXT

DH

Notes

- Playing stops as soon as the button is released. If the same

button is pressed again later, playing re-starts from the
beginning of the file instead of where it left off.

- If both buttons are held down, button #1 prevails. To play

both sounds alternately when both buttons are held down,
use the RH mode.

5. Play different sounds each time when the same button is
pressed.

Intended Operation

- Press button #1 to play file #001 the first time, file #002 the

second time, and etc.

- Button #2 sequences through file #201, #202...
- When playing, pressing any button has no effect.

Required Text in MODE.TXT

SN

Notes

- Up to 99 files can be assigned to each button and file

numbers but be consecutive.

- To allow playback interruption, use the SI mode.
- To play only when the button is held down, use the SH mode.

In the SH mode, the same sound will repeat for as long as
the button is held down. To advance to the next sound, the
button must be released first.

Содержание DM2218C









Отзывы: