Elesa MPI-15, Руководство по эксплуатации, Страница: 17 / 32

17
Magnetic length and angle measuring system MPI-15
ELESA models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.
ITA
ENG
FRA
DEU
Parameter Description Available options Std Value
ProGOrG
Direct reference value
setting
The parameter allows enabling the direct reference value setting procedure.
Use and to choose between:
EnAbLE
: in the operating mode the parameter
OriGin
can be modified
by pressing +
diSAbLE
: the parameter
OriGin
can be modified only by entering
the programming mode.
diSAbLE
ProGOFS
Direct offset value
setting
The parameter allows enabling the direct offset value setting procedure.
Use and to choose between:
EnAbLE
: in the operating mode the parameter
OFFSEt
can be modified
by pressing +
diSAbLE
: the parameter
OFFSEt
can be modified only by entering
the programming mode.
diSAbLE
LanG
Language The parameter allows selecting the language.
Use and to choose between:
ItALiAn
ENGLiSH
dEutSCH
ItALiAn
SEtUP
Sensor calibration
procedure
The parameter allows running the calibration procedure.
Press to start the procedure. See Par. 7 for detailed procedure description.
dEFAULt
Reset parameters to
factory value
Press to reset the parameters.
A confirmation message is displayed: press to confirm, to exit the procedure.
reL
Software release The software release is displayed.
E02