background image

22 | EN  

 elero GmbH

 

 

 elero GmbH

  

EN | 23 

I

f you wish to trigger the intermediate position for different 

receivers simultaneously, these receivers must be program-

med on the same channel. 

3.5.8  Deleting the intermediate position 

1. Press the [

Pos ▼

] button for more than 5 seconds or the 

[reset] button.  

The intermediate position is now deleted.  

The LED flashes green three times. 

You can also delete the intermediate position with a pro-

grammed hand-held transmitter. 

3.5.9  Deleting the Ventilation position / Turn position /  

Fabric stretching position 

1. Press the [

Pos ▲

]

 button

  for more than 5 seconds or 

the [reset] button.  

The ventilation position / turn position / fabric stretching 

position is now deleted.  

The LED flashes green three times. 

You can also delete the ventilation position / turn position / 

fabric stretching position with a programmed hand-held 

transmitter. 

Technical specifications 

All the information in this chapter refers to an ambient tem-

perature of 20 °C (± 5 °C). 

Technical specifications VarioTec-868 (-915) 

Power supply 

230 V / 50 Hz 

Power supply to the control  

unit via power supply unit 

5 V DC  

max. 0.5 A 

Rated surge voltage 

4 kV 

Switching current 

5 A / 250 V AC  

at cos 

φ = 1 

Technical specifications VarioTec-868 (-915) 

Realized limit ELV 

SELV: 8 V  

at the terminals 1 to 6 

Switching contact at contact 

output 

Potential free, can turn 

SELV or any outer  

conductor 

Power consumption/standby  0.5 W (typical) 

Operation effect 

Type 1B 

Degree of pollution 

Ingress protection 

IP20 

Protection class (control 

unit) with proper installation 

II 

Ambient temperature [°C] 

0 ... 45 

Radio frequency [MHz] 

(band) 

868 | 915 

Mounting type 

Flush mount housing dia. 

58 mm wall installation 

surface-mounted in corres-

ponding AP housing 

Weight [g] 

140 

Dimensions (WxHxD) [mm]  85 x 85 x 53 
Maximum number  

of transmitters 

16 

Article number (868)  

(-915) 

28 340.0006 / 28 341.0006   

28 340.0906 / 28 341.0906 

Fig. 6 

Technical Specifications VarioTec-868 

(-915) 

Содержание VarioTec-868 DC
















Отзывы: