elero TempoTel 28 260.0001, Руководство по эксплуатации

Страница: 5 / 16

Explanation of functions
GB-7 GB-8
GB
Transmission control light
The transmission control light is illuminated when a radio
signal is being transmitted.
If battery power is low, the transmission control light will flash
during transmission.
The transmission power or radio operating range will decrease
as battery power decrease. If the transmission control light
does not light up when the buttons are pressed, the batteries
must be replaced.
Group control
Group control refers to the operation of one or more receivers
at the same time. The selected group is controlled via a control
command.
The TempoTel has five radio channels which can be used for
group control.
Select button
The select button may be used to select and programme up to
5 channels. The LED lights for the different channels light up to
indicate when a given channel is being used.
An additional channel is reserved for central command control.
This is allocated automatically. When the central command is
active, all five LEDs light up.
NB: The label under the see-through cover can be used to
make a note of the groups which have been programmed.
Initial operation/Factory settings
Initial operation
Press any button on the timer to activate it. The +/- buttons can
now be used to select the desired language and confirm your
selection by pressing the
OK button. The timer is now is automatic
mode.
Factory settings
TIME/DATE: – Current CET and current date
PROGRAMME: – ASTRO EVENING W Switching times Mon-Fri (1-5)
v
7.00 a.m.
b ASTRO EVENING
Switching times Sat and Sun (6,7)
v 8:00 a.m.
b
ASTRO EVENING
SETTING: – HOLIDAY OFF
– END LIMIT
– SUMMER/WINTER ON
FUNCTION: – ROLLER SHUTTER
– EXPERT MODE OFF
Note: If the RESET button is pressed (using a ballpoint pen or
similar object), the TempoTel will revert to the default factory
settings.
Exception: Function, language and city menu levels..