The device consists of materials that can be recycled if it is
disassembled by a specialized company. Please observe
local regulations on disposal of packaging material and old
equipment.
During disassembly additional risks may occur that do not
arise during operation.
WARNING
Risk of injury due to electricity.
Risk of electric shock.
►
Physically disconnect the energy supply cables and
discharge stored energy. Wait for at least 5 minutes after
switching off until the motor has cooled down and the
capacitors have lost their voltage.
►
For disassembly above body height, use suitable, appro-
ved and stable climbing aids.
►
Any electrical work must only be performed by person-
nel speci
fi
ed in section „Safety instructions on electrical
installation“.
Scrapping
When scrapping the product, applicable international, natio-
nal and local rules and regulations must be complied with.
Please observe the recycling and dismantling properties of
materials and components as well as environmental and
health risks during recycling and disposal.
CAUTION
Environmental damage due to incorrect disposal
►
Electrical scrap and electronic components are subject to
hazardous waste treatment and may only be disposed of
by approved specialists.
►
Material groups like different plastics and metals must be
sorted and put into the recycling system or disposed of.
Disposal of electrotechnical and electrical components
Disposal and recycling of electrotechnical and electrical
components must be carried out according to the applicable
laws or national regulations.
12
EC Declaration of Conformity
EG-KONFORMITÄTSERKLÄRUNG
Wir erklären hiermit, dass das/die nachfolgend genannte/n Produkt
/
e der
Maschinenrichtlinie 2006/42/EG
entspricht/entsprechen.
Produktbezeichnung:
Rohrmotor
•
RolTop S (120V/60Hz) alle Varianten
•
RolTop M (120V/60Hz) alle Varianten
Beschreibung:
Einsteckantrieb
für
Rollläden
Die Übereinstimmung der/s bezeichneten Produkte/s mit den wesentlichen Schutzanforderungen wird durch
Einhaltung folgender Richtlinien und Normen berücksichtigt:
•
EMV-Richtlinie
2004/108/EG
•
Niederspannungsrichtlinie
2006/95/EG
DIN EN 60335-2-97 (VDE 0700-97):2009
•
DIN EN 14 202:2004
Beuren, 31.05.2012
Ralph Trost
-CE-Beauftragter-, -Doku-Bevollmächtigter-
Fig. 13 EC Declaration of Conformity RolTop type S and M
13
US: Addendum to the manual
UL approval
This device complies with Part 15 of the FCC Rules and
with RSS-210 of Industry Canada. Operation is subject to
the following thwo conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference recieved, inclu-
ding interference that may cause undesired operation. Any
changes or modi
fi
cations made to this device without the
express permission of the manufacturer may void the user‘s
authority to operate this device.
14
CA: Addendum au manuel
Homologation UL
Le présent appareil est conforme aux CNR-210 (et FCC
part 15) d‘Industrie Canada applicables aux appareils radio
exempts de licence. L‘exploitation est autorisée aux deux
conditions suivantes :
(1) l‘appareil ne doit pas produire de brouillage, et
(2) l‘utilisateur de l‘appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d‘en compromettre le fonctionnement.
EC Declaration of Conformity | UL approval | Homologation UL
©
elero
GmbH
US+CA | 9
