background image

18 | EN   

 elero GmbH

 

 

 elero GmbH

  

EN | 19 

A group pictogram is shown for a group channel and for 

the master channel (combination of all channels, "All"). 

A channel or group number is not displayed in the master 

channel. 

Important:

 

If there are different products in a single channel after 

programming, the product pictogram is shown with 

an additional reference to different products (product 

combination). 

This is applicable only if "INTERNAL" is selected in the 

Settings - Product Selection menu, because only in this 

case is the product type returned by the programmed 

receiver displayed. 

4.4.1  Icons in the device display 

Pictograms in the toolbar 

Battery indicator  

(low battery capacity) 

Tab. 3  Pictograms in the toolbar of the display 

Icons in the product field 

Roller shutter 

Interior shading 

Icons in the product field 

Venetian blinds 

Awning 

Light 

Heating 

Combination of different 

 

products in the single channel 

Display of group and master channel 

Tab. 4 

Icons in the product field of the display 

Icons in the position field 

Up 

Down 

Upper end position 

Lower end position 

Содержание MultiTel 2
























Отзывы: