eClip Full User Guide
5
We recommend that you launch the eClip app only after you’ve completed the next step.
So, first, let’s pull the plastic tab out.
Preparing the eClip Battery
The eClip includes a battery that should give you 500 hours of continuous use. It is shipped
at full strength, and is protected against discharge during shipping by a plastic tab.
1. Remove the eClip from the box and turn it over.
2. Take a coin and rotate the battery cover counter-clockwise until it comes off.
3. Lift up the battery, take the plastic tab out, and dispose of it.
4. Put the battery back in place, with the flat side, marked with a plus sign (+) facing up.
5. Replace the battery cover, turning it clockwise with a coin, until the coin is in line with
the two H-clips.
Once you close the battery cover the eClip‘s red LED flashes quickly three times to indicate
that it is on. It will then continue to flash about once every second.
For now, turn the eClip off by pressing the On/Off switch continuously for three seconds.
The red LED flashes three times, and then the eClip turns off.
CR2032
3V
To prevent accidentally turning the eClip off, hold down the On/Off switch
continuously for three seconds until you see the red LED flash quickly 3 times.
This will help prevent accidentally turning the eClip on or off.
Note:
The battery cover is tight to prevent young children from opening it.
Note:
