-16-
PARTS LIST - SECTION C
RESISTORS
Qty.
Symbol
Description
Color Code
Part #
1
R31
5.05k
Ω
.5% 1/4W
green-black-green-brown-green
145050
1
R33
5.6k
Ω
5% 1/4W
green-blue-red-gold
145600
2
R35, 36
5.62k
Ω
.5% 1/4W
green-blue-red-brown-green
145650
1
R29
10k
Ω
5% 1/4W
brown-black-orange-gold
151000
1
R32
200k
Ω
5% 1/4W
red-black-yellow-gold
162000
1
R34
390k
Ω
5% 1/4W
orange-white-yellow-gold
163900
1
R30
2.2M
Ω
5% 1/4W
red-red-green-gold
172200
Note:
Resistor tolerance (last band) of 5-band resistors may be green instead of brown.
CAPACITORS
1
C9
.1
µ
F (104)
Ceramic
251010
1
C7
.1
µ
F (104)
Mylar
251017
1
C8
22
µ
F
Electrolytic (Lytic)
272244
SEMICONDUCTORS
4
D7 - D10
1N4148
Diode
314148
1
U3
358/17358
Integrated Circuit
330358
MISCELLANEOUS
1
U3
IC Socket 8-pin
664008
SECTION C
AC Voltage & Current Circuit
ASSEMBLE THE FOLLOWING COMPONENTS TO THE PC BOARD
D9 - 1N4148 Diode
D10 - 1N4148 Diode
(see Figure H)
R35 - 5.62k
Ω
.5% 1/4W Res.
R36 - 5.62k
Ω
.5% 1/4W Res.
(green-blue-red-brn-green)
(see Figure B)
C7 - .1
µ
F (104) Mylar Cap.
R29 - 10k
Ω
5% 1/4W Res.
(brown-black-orange-gold)
(see Figure B)
R34 - 390k
Ω
5% 1/4W Res.
(orange-white-yellow-gold)
(see Figure E)
R32 - 200k
Ω
5% 1/4W Res.
(red-black-yellow-gold)
(see Figure E)
R31 - 5.05k
Ω
.5% 1/4W Res.
(green-blk-green-brn-green)
(see Figure E)
In all of the following steps
the components must be installed on the top legend side
of the PC board. The board is turned to solder the component leads on the
selector switch side
.
C9 - .1
µ
F (104) Ceramic Cap.
R33 - 5.6k
Ω
5% 1/4W Res.
(green-blue-red-gold)
(see Figure E)
D7 - 1N4148 Diode
D8 - 1N4148 Diode
(see Figure H)
R30 - 2.2M
Ω
5% 1/4W Res.
(red-red-green-gold)
(see Figure E)
C8 - 22
µ
F Lytic Capacitor
(see Figure I)
U3 - IC Socket 8-pin
U3 - 358 Integrated Circuit
Align the notch on the socket (if any)
with the notch marked on the PC
board.
Solder the socket to the PC
board. Insert the IC into the socket with
the notch as shown below.
Socket
Notch
C8
Figure I
Mount the capacitor with the
negative ( ) lead in the negative
hole and the positive (+) lead in
the positive hole marked on the
PC board. Lay the capacitor flat
against the PC board as shown.
Figure H
Mount the diode with the
band in the direction of the
arrow on the top legend.
-19-
ASSEMBLE THE FOLLOWING COMPONENTS TO THE PC BOARD
In all of the following steps
the components must be installed on the top legend side of the PC board. The
board is turned to solder the component leads on the selector switch side
.
U4 - IC Socket 14-pin
U4 - 324 Integrated Circuit
Align the notch on the socket (if
any) with the notch marked on
the PC board. Solder the socket
to the PC board. Insert the IC
into the socket with the notch as
shown below.
Notch
R44 - 76.8k
Ω
1% 1/4W Res.
(violet-blue-gray-red-brown)
(see Figure E)
R43 - 11k
Ω
1% 1/4W Res.
(brown-brown-blk-red-brn)
(see Figure E)
R42 - 39.2k
Ω
1% 1/4W Res.
(orange-white-red-red-brn)
(see Figure E)
R14 - 240k
Ω
5% 1/4W Res.
R15 - 240k
Ω
5% 1/4W Res.
(red-yellow-yellow-gold)
(see Figure B)
C12 - .01
µ
F (103) Mylar Cap.
C13 - .01
µ
F (103) Mylar Cap.
D3 - 1N4001 Diode
D4 - 1N4001 Diode
(see Figure H)
R45 - 158k
Ω
1% 1/4W Res.
(brown-grn-gray-orange-brn)
(see Figure E)
D11 - 1N4148 Diode
(see Figure C)
R7 - 98.8
Ω
1% 1/4W Res.
(wht-gray-gray-gold-brn)
(see Figure E)
R8 - 900
Ω
1% 1/4W Res.
(wht-blk-blk-blk-brn)
(see Figure E)
R9 - 9k
Ω
1% 1/4W Res.
(wht-blk-blk-brn-brn)
(see Figure E)
R10 - 90k
Ω
1% 1/4W Res.
(wht-blk-blk-red-brn)
(see Figure E)
R11 - 909k
Ω
1% 1/4W Res.
(wht-blk-wht-org-brn)
(see Figure E)
VR2 - 200
Ω
Potentiometer
D5 - 1N4001 Diode
D6 - 1N4001 Diode
(see Figure H)
R39 - 39.2k
Ω
1% 1/4W Res.
(org-wht-red-red-brn)
(see Figure E)
R37 - 150
Ω
5% 1/4W Res.
(brn-grn-brn-gold)
(see Figure E)
C11 - .01
µ
F (103) Mylar Cap.
C10 - .01
µ
F (103) Mylar Cap.
R41 - 1.91k
Ω
1% 1/4W Res.
(brn-wht-brn-brn-brn)
(see Figure E)
R38 - 10k
Ω
1% 1/4W Res.
(brn-blk-blk-red-brn)
(see Figure E)
R40 - 4.12k
Ω
1% 1/4W Res.
(yel-brn-red-brn-brn)
(see Figure E)
