Elenberg SPT-7090, Инструкция по эксплуатации

Страница: 34 / 48

34
liquid damage the wireless remote control.
• The operation should be in its receiving range.
• It should be placed at where is 1 m away from the TV set or stereo sound sets.
• If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
When the wireless remote control is lost or damaged, please use the manual switch,
at this time, it is running in Auto Run mode that will not change the temperature
setting value and fan speed.
The manual switch can be operated as follow:
• At operation: When the unit stopped running, press
ON/OFF button, unit will enter into AUTO RUN mode.
The microcomputer will accord to the room temper
-
ature to select the (COOL, HEAT, FAN) mode auto
-
matically, to obtain the comfortable effect.
• At stopping: When the unit is running, press the ON/
OFF button of the manual switch, the unit will stop
work.
The code switch can be operated as follow:
• At operation: When the unit is stopped running, ad
-
just the code switch to AUTO, the unit will enter into
AUTO RUN mode. The microcomputer will accord to
the room temperature to select the (COOL, HEAT,
FAN) mode automatically, to obtain the comfort
-
able effect.
• At stopping: When the unit is running, adjusts the
code switch to STOP position, the unit will stop work.
Caution:
• Turn power off and pull out the power plug before cleaning air conditioner. Or
it may cause electric shock.
• Never sprinkle water on the indoor unit and the outdoor unit for cleaning be
-
cause it can cause an electric shock.
• Volatile liquid (e.g. thinner or gasoline) will damage the air conditioner. (So
wipe the units with a dry soft cloth, or a cloth slightly
moistened with water or cleanser.)
Clean the front panel
1. Take off the front panel
Along the direction of arrows to lift the front panel up,
meanwhile to hold both slots of the front panel and
take it out forcibly and then can take it off.
2. Washing
Clean with a soft brush, water and neutral deter
-
gent and then dry it. (Note: Before cleaning the unit,
please take down the display box irstly, then to wash
the panel, if the unit has display on the front panel.
Never use the water above 45 ºC to wash the panel,
or it could cause deformation or discoloration.)
EMERGENCY OPERATION
CLEAN AND CARE