Elenberg HT-410, Руководство пользователя

Страница: 28 / 36

28
tory setup is off.
Karaoke (No this function in some types of machine)
KARAOKE can be controlled to output by the setup menu. There
are 2 optional output modes: ON/OFF.
MIC
Adjust microphone volume and echo volume to the minimum level.
Insert microphones into the microphone jacks on the front panel.
The two microphones can be used in the same time.
MIC VOL
• Use the microphone volume knob to adjust the microphone vol-
ume.
• When playing karaoke disc, to eliminate the original singing, press
L/R/ST key on the remote controller to select left channel or right
channel.
VIDEO SETUP PAGE
COMPONENT VIDEO
OFF: set video output to the composite
YUV: set video output in analog component video format when
connecting to Y/U/V terminals
P-YUV: set progressive YUV signals. Connection same as YUV
RGB: set video output in Red/Green/Blue format when connecting
to SCART terminals
P-RGB: progressive RGB signals. Connection same as RGB
VGA: set to this item when connecting to VGA terminals.
Notes:
If the video setting differs with the physical connection, the TV set
may be without picture. In case of no picture, you can RESET the
machine, then keep pressing key [V_MODE] until the picture is OK
again.
COLOR SETTING SETUP
You can set the sharpness, brightness, gamma contrast, luma
etc. according to your preference.
COLOR SETTING includes: SHARPNESS, BRIGHTNESS, CONTRAST.
Adjust each item in the Color Setting to get the suitable colour
output of the TV screen.
SHARPNESS: There are three optional output modes: HIGH\ME-
DIVM\LOW
GAMMA: There are four optional output modes: HIGH\MEDIVM\
LOW\NONE
BRIGHTNESS: Use the up and down arrow button to move the scroll
and adjust the brightness.
CONTRAST: Use the up and down arrow button to move the scroll