background image

INSTALLATION MANUAL

6

2 Important safety information

The fireplace may only be installed by a qualified installer/dealer, 

following these installation instructions. We advise you to read 

these instructions properly, before commencing the installation 

of your device. 

Before installation check the decive for transport damage and 

inform your supplier immediatly if damage is found. 

Check the data on the dataplaat. The gas type and pressure 

should check out with those locally available. The data plate is 

mounted to the device. Make sure it is accessible at all times.  

This device is design to be used with natural gas or LPG. The 

device can only be used with the type of gas specified on the 

data plate at the time of purchase. 

The device may never be used without the glass of when glass 

is broken. The flue gasses can get into the installation room. The 

settings and construction of the device must not be changed! 

Parts are only to be changed with original parts by the original 

manufacturer. 

The device is provided with a special set of decorative materials. 

Do not place any extra imitation logs or decoration material on 

the burner or in the combustion chamber. See chapter 11 for an 

instruction on how to arrange the decoration properly. 

The glass and frame on this appliance acts as a fireguard 

conforming to BS: 1945 – 1971 and satisfies the Heating Appliance 

(Fireguards) regulations 1991. No part of the window or frame 

should be permanently removed. It does not give protection for 

young children aged or infirm, extra guarding (conforming to 

BS8423: 2002) should be considered so the special hazards that

exist in nurseries and other places where there are young 

children, aged or infirm persons are minimized.

The heat that is coming from the device may effect the materials 

in its surroundings. Always take into account to correct safety 

distances. For more information see chapter 6. 

1 CE statement 

We hereby declare that the design and construction of the 

Element4 gas appliances are complying to the essential 

demands and regulations for gas products. 

Product: 

• 

Gas fireplace, local spaceheater 

Model: 

E4-18  

• 

Modore 75H 

Applicable EG-guidelines: (EU) 2016/426 (GAR)

Applicable harmonized norms: 

• 

NEN-EN-613

• 

NEN-EN-613/A1

This declaration loses its validity when changes to the device are 

made without the written permission by Element4. You can ask 

for a copy of the test certificates of all models via our general 

e-mail adress, which is found on the back of this manual. 

J. Kempers

CEO

Содержание Modore 75H





































Отзывы: