background image

4

Chapter 1 

I N S T A L L A T I O N   M A N U A L   |

4

CE STATEMENT 

We hereby declare that the design and construction of the Element4 gas 
appliances are complying to the essential demands and regulations for 
gas products. 

Product: 

• 

Gas fireplace, local spaceheater 

Model: 

E4-14

• 

Modore 240

• 

Tenore 240

Applicable EG-guidelines: 

• 

(EU) 2016/426 (GAR)

Applicable harmonized norms: 

• 

NEN-EN-613

• 

NEN-EN-613/A1

This declaration loses its validity when changes to the device are made 
without the written permission by Element4. You can ask for a copy of 

the test certificates of all models via our general e-mail adress, which is 

found on the back of this manual. 

J. Kempers

CEO

IMPORTANT SAFETY INFORMATION

Please take into account the following things for a safe installation of 

your fireplace! 

• 

The fireplace may only be installed by a qualified installer/dealer, 

following these installation instructions. We advise you to read 

these instructions properly, before commencing the installation of 

your device. 

• 

Before installation check the decive for transport damage and 
inform your supplier immediatly if damage is found. 

• 

Check the data on the data plate. The gas type and pressure should 
check out with those locally available. The data plate is mounted to 
the device. Make sure it is accessible at all times.  

• 

This device may not be used a primary heat source! 

• 

This device is designed to be used with natural gas or LPG. The 

device can only be used with the type of gas specified on the data 

plate at the time of purchase. 

• 

The device may never be used when glass is broken or damaged. 

The flue gasses can get into the installation room. The settings and 
construction of the device must not be changed! 

• 

Parts are only to be changed with original parts by the original 
manufacturer. 

• 

The device is provided with a special set of decorative materials. 
Do not place any extra imitation logs or decoration material on the 
burner or in the combustion chamber. See "

CHAPTER 10

CHAPTER 10

" for an 

instruction on how to arrange the decoration properly. 

• 

The glass and frame on this appliance acts as a fireguard conforming 
to BS: 1945 – 1971 and satisfies the Heating Appliance (Fireguards) 

regulations 1991. 

• 

No part of the window or frame should be permanently removed. 

It does not give protection for young children aged or infirm, extra 

guarding (conforming to BS8423: 2002) should be considered so 
the special hazards that exist in nurseries and other places where 

there are young children, aged or infirm persons are minimized.

• 

The heat that is coming from the device may effect the materials 

in its surroundings. Always take into account to correct safety 

distances. For more information see "

CHAPTER 6

CHAPTER 6

"

Содержание Modore 240



































Отзывы: