43
MAINTENANCE
Element4 Gas Fireplaces Rev# 07022020
European
Home
.com
REMOVING AND CLEANING THE GLASS
REMOVING THE GLASS PANELS
• No. 2 Phillips screwdriver (not included)
• Two small flat screwdrivers
• Gloves (not included)
• Suction Cup
TOOLS REQUIRED
The glass panels on this fireplace are held in place by a
number of retaining bolts and gasketed clamps. These
instructions will show you how to remove and install the
clamps and glass panels.
Please read these instructions completely before proceeding.
Ensure that the glass is cool to the touch before proceeding.
OVERVIEW
Side Trim
Bottom Trim
Step 1.
The Outer Glass Panels are held in place with a rope gasket within a
top and bottom channel. Gently pull the rope gaskets from the top
and bottom channels.
Step 2.
For each Outer Glass Panel, attach the suction cup to the center of the
glass and lift the glass up into the clearance notch.
When the glass panel is raised into the clearance notch there is
enough clearance to swing the lower edge of the glass panel out into
the room.
When the glass panel is outside of the frame, lower the glass panel out
of the clearance notch and carefully, and securely, set the panel aside.
Step 3.
Beginning with the two vertical Side Trims, remove all five of the trim
pieces from the fireplace. The trim pieces are held firmly in place with
magnets. Two small screwdrivers
will help pry the Bottom Trims up
and reduce bending Trim.
Step 4.
Gasketed clamps hold the edges
of the Inner Glass Panels in place.
Unscrew the retaining bolt(s)
holding the glass clamp and then
remove the clamp. Remove all of
the retaining bolts and clamps holding Inner Glass Panels.
Figure 84
Figure 85
Figure 86
