33
ENCLOSING the FIREPLACE
Element4 Gas Fireplaces Rev# 03242020
European
Home
.com
Remove the four bolts holding the white door/
frame cover to the frame. Separate the frame
and cover then mount the Access Door frame
to the rough opening as shown.
Replace the white door/frame cover onto the
frame and secure it with the four bolts.
Fit the gas control tab into the bracket on
the Access Door frame.
Tighten the bolt through the mounting
bosses.
Carefully cut the black tie wraps which hold
the line set to the bottom of the fireplace then
carefully unwrap the line set. Lay the line set
out towards the location of the Access Door.
Do not kink the lineset and do not bend to a
radius of less than 2”/50
mm
.
Figure 51
Figure 52
Figure 53
Figure 54
