46
OPERATING the FIREPLACE
Element4 Gas Fireplaces
European
Home
.com
1 2
ON
AM
PM
OFF
Remote One-Button Operation
(Default Setting)
• Press and hold
button until two short
beeps and a blinking series of lines
confirms the start sequence has begun;
release button.
•
Main gas flows once pilot ignition is
confirmed.
• Remote automatically goes into Manual
Mode after main burner ignition.
NOTICE
Change from one-button to two-button ignition operation by
pressing and holding button for 10 sec. immediately after ins-
talling batteries.
is displayed and
is flashing. When change is
complete
will change to .
1 2
ON
AM
PM
OFF
Remote Two-Button Operation
• Press
and
button simultaneously
until two short beeps and a blinking series
of lines confirms the start sequence has
begun; release buttons.
•
Main gas flows once pilot ignition is
confirmed.
• Remote automatically goes into Manual
Mode after main burner ignition.
Change from two-button to one-button ignition operation by
pressing and holding button for 10 sec. immediately after ins-
talling batteries.
is displayed and is flashing. When change is
complete will change to
.
NOTICE
WARNING
If the pilot does not stay lit after several tries, turn the main valve
knob to OFF and follow the operating instructions “TURN OFF GAS
TO APPLIANCE”.
STANDBY MODE (PILOT FLAME)
Remote
• Press and hold button to set appliance to pilot flame.
TO TURN OFF FIRE
1 2
ON
AM
PM
OFF
Remote
• Press button to turn OFF.
NOTE:
There is a 5 second delay before the
next ignition is possible.
FLAME HEIGHT ADJUSTMENT
1 2
ON
AM
PM
OFF
Remote
• To increase flame height press and hold
button.
• To decrease flame height or to set appliance
to pilot flame, press and hold button.
DESIGNATED LOW FIRE and HIGH FIRE
NOTE:
Backlight must be on for high fire and low fire double-click
operation.
AM
• To go to low fire, double-click button.
is displayed.
NOTE:
Flame goes to high fire first before
going to low fire.
AM
• To go to high fire, double-click button.
is displayed.
WARNING
If the appliance will not operate, follow the instructions “TURN OFF
GAS TO APPLIANCE”.
COUNTDOWN TIMER
1 2
ON
AM
PM
OFF
ON/SETTING:
1.
Press and hold button until displayed,
and hour flashes.
2. To select hour press or button.
3. To confirm press button. Minutes
flash.
4. To select minutes press or button.
5. To confirm press button or wait.
OFF:
Press button, and countdown time disappear.
NOTE:
At end of countdown time period, the fire turns off. The
Countdown Timer only works in Manual, Thermostatic, and
Eco Modes. Maximum countdown time is 9 hours and 50
minutes.
STANDBY MODE (PILOT FLAME)
FLAME HEIGHT ADJUSTMENT