53
FIRE MEDIA
Element4 Gas Fireplaces
European
Home
.com
LOG ARRANGEMENTS (
TRISORE 95, BIDORE 95,
MODORE 95, OPTICA, BIOPTICA
)
Ensure that the hearth panel is sitting firmly in the base of the fire box, with the long slot in the center of the panel aligning with
the center slots on the burner tube. The pilot flame must be visible through the panel and the cut-out in the pilot shield. Scatter
the embers over the panel, as shown in Figure 40.
Ensure no embers enter the pilot area, keeping the gap between the up-fold on the panel and the burner tube clear of embers.
This is shown in detail, Figure 43. Position the large log centrally at the rear as shown in Figure 41, the three fir cones and one of
the small branch logs sit on the base of the fire, as shown. Make sure the pilot is still clear.
Position 2 more large logs at either end of the central log, noting that one will be sitting on top of the smaller branch. The 2 “Y”
shaped logs are then placed to lie on top of the large logs. Make sure the pilot is still clear. See Figure 41.
Figure 42 shows how the remaining logs are inserted. Finally check the pilot is clear, no embers have entered the pilot area and
the burner lighting is good before the glass is replaced.
Figure 40
.
Figure 41
Figure 42
Figure 43
