USER MANUAL
8
FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT
9
ASSEMBLY (CONT.)
OPERATION (CONT.)
Install the pet tool holder by aligning one side of
the holder with the guides. Once the guides are
aligned in the guide slot, press until the other
side locks into place.
Place the pet tool on the pet tool holder by
aligning the bottom hook with the pet tool
and then press into the holder.
Rotate the power cord wrap to release the power
cord. Plug in your machine.
Step on the brush cover and pull back on handle,
to engage for operation.
The unit has five height adjustments for different
floor types, from hard floor to high profile carpet.
When adjusting the height of the unit, the
machine must be in the upright position.
Push ON/OFF button to switch on.
Remove hose handle from the hose socket.
The hose handle can be used immediately
or with the addition of attachments.
OPERATION
