Element RW-337D, Руководство пользователя

Страница: 12 / 69

RW-337D User Manual I Page 11 of 69
➢
Paper thickness: 0.06 - 0.085mm
2) Multi-layer paper (1 or1 copy)
➢
Paper width:
80±0.5mm / 76±0.5mm / 69.5±0.5mm / 57.5±0.5mm
➢
Paper thickness:
0.05 - 0.08mm (single layer), total thickness ≤0. 14 mm
(multi-layer)
Caution:

Use the multi-layer paper (1 or 1 copy) with the original layer
thicker than its under-layer.
2.3.2 Marked paper
Besides the requirements of the continuous paper, marked paper should
meet the following requirements:
1) Mark position
➢
RW-337D printer reserves 8 positions for mark sensor, which can
detect marks on either the front side or the reverse side of paper.
Position of the sensor is as shown in the figure.
➢
Mark sensor can be equipped and adjusted according to user’s
needs. The default position of mark sensor is on the right side of
paper (paper feed direction) as shown in the figure to detect the
mark on the front side.