Enduro, Trailwalker, Trailrunner & Knightrunner
1. Install the pulley onto the rear pulley mount with a
M3x16 screw with a washer in between the pulley
and the mount.
2. Install the rear pulley bracket by replacing the
rear bumper mount screws with the included
M3x12 screws.
3. Install the front pulley mount to the backside of
the shock tower with two M3x10 screws
4. Install the shoulder screw for the loop end of the
kinetic cord into the front of the mount.
5. Install the pulley to the mount with a M3x16 screw
with a washer in between the pulley and mount.
6. Install the kinetic cord as shown on the other side
of the instructions.
Gatekeeper & Ecto
1. Install the pulley onto the rear pulley mount with a
M3x16 screw with a washer in between the pulley
and the mount.
2. Install the rear pulley bracket by replacing the
rear bumper mount or body post mounting screws
with two M3x12 (for body mounts) or M3x16 (for
bumper mount) screws. Do not overtighten.
3. Install the front rope guide to the underside of the
front bumper mount with two M3x16 screws. Do
not overtighten.
4. Install the kinetic cord as shown on the other side
of the instructions.
