Element Labs Kelvin BRICK, Руководство пользователя

Страница: 8 / 32

Kelvin™ BRICK User’s Guide 2-3
Chapter 2
Setup
Power Connection
The BRICK ships with a standard male IEC AC power connector handling 100-240VAC,
50/60Hz.
Figure 2.5
BRICK AC Connector
Silicone Boot
The Kelvin BRICK ships with a silicone boot around the front to provide protection. The
boot can also hold 2 plastic lenses (clear and diffused). The boot has 2 slots so 2 lenses
can be used at the same time. If desired, gel, diffusion, or brightness enhancing film can
be cut to fit between these 2 lenses.
Figure 2.6 BRICK Boot Cross Section
N O T E If only one lens is used, it must be installed in the outer lens slot.
Hot
Ground
Neutral
(Blue)
(Brown)
(Green/Yellow)
Outer Lens Slot Inner Lens Slot
157.98mm x 49.19mm
(6.22” x 1.94”)
154mm x 45.2mm
(6.06” x 1.78”)