V3.4
Element14 | element14.com/PiDesktop
4
2)
Assembly & Instructions
2.1
Additional Required Items
•
Raspberry Pi 3 or 2
•
Pre-programmed Micro SD Card
•
Power Supply (5V @ 2.5A)
•
HDMI Monitor
•
HDMI Cable
•
USB Keyboard & Mouse
•
Camera Module (Optional)
•
mSATA SSD, max. up to 1 TB or USB Flash Drive (Optional)
2.2
Power Supply Selection Guide
IMPORTANT:
To ensure stability, a minimum requirement of 5V @ 2A power supply is
required to power the Pi Desktop. Any power supply with current capacity less than 2A
may damage the file system and/or hardware.
It is recommended to use an official Raspberry Pi power supply:
5V @ 2.5A with Pi3
5V @ 2A with Pi2
2.3
Assembly Instructions
1)
Remove the protective film from the bottom of the heat sink and place it on the top
of the Processor on the Raspberry Pi.
2)
Insert the pre-programmed micro-SD card into the Raspberry Pi SD card slot.
Don’t have one? Download the latest
Rasbian Jesie with PIXEL
image from the
below link and write to the µSD card using preferred image writer (recommended
tool – Win32DiskImager) following the official guide.
https://www.raspberrypi.org/downloads/
3)
(Optional: Complete only if you are installing a Pi camera) – Connect the Pi Camera
