elem 5411074158590, Оригинальное руководство пользователя

Страница: 82 / 92

- 82 -
1
， ， ， ，
Cutting
1. Start machine and let the motor reach full speed.
2. Place a log on the working table
3. To make the cut, push the working table with both hands at the handle towards the saw blade:
-
Exert only so much pressure that the motor speed does not fall off.
-
Push feed working table until it hits the stop.
4. Return working table completely to the starting position.
Note:
If the log was not completely separated, turn it over and repeat the cutting operation from the opposite
side (reversing cut).
1. Remove the cut off piece from the feed rock – make next cut…
2. If no further cutting is to be done immediately afterwards, turn machine OFF.