-
At regularly intervals check the tightening of all bolts and screws. Wear off or badly tightening
nuts and bolts can involve some important damages to the engine or the frame.
-
If the blade hits violently an obstacle, stop the lawnmower and bring it to agreed service
station.
THE BLADE: the blade is made of pressed steel, in order to obtain a clean work sharpen the blade
frequently, around every 25hours of work. Be sure that the blade is always well balance, introduce a
small iron axle(
φ
2 or
φ
3 mm) in the central hole of the blade, it should stay horizontal.
If the blade does not stay horizontal balance it by taking off some metal on the side, which is down.
YOU MUST ONLY USE THE MANUFACTURER BALDE IT SHOULD BE REFERENCED AND
WEAR THE MANUFACTURER BRAND “Gians”
To remove the blade, unscrew the screw,
○
1check the blade support and change all spare parts if they
are worn out or damage.
When reassembling the blade, make sure that the cutting edges face in the direction of the engine
rotation. The blade screw must be torque to 3.7 K·gm (37Nm) with a Dynamometric tool.
ONLY USE ORIGINAL SPARE PARTS. SPARE PART OF BAD QUALITY CAN INVOLVE
IMPORTANT DAMAGES TO YOUR LAWNMOWER AND BEPREJUDICIAL FOR YOUR SECURITY
Technical Data:
Engine Model:
1P54F
Max.Power:
3.8 kW
Rated Speed:
3000/min
Displacement:
139cc
Starting:
Recoil
Tank Volume:
1.5L
Cutting Heights:
20-75mm 5 grades
Height Adjustment:
One Lever Adjustment
Cutting Path:
458mm
Wheel Diameter:
153mm(Front)/204mm(Rear)
Wheel Width:
42mm(Front)/50mm(Rear)
Catcher Volume:
50L
Deck Material:
Steel
LwA:
96dB(A)
LpA at operator’s ear: 84.8dB(A)
Vibration:
4.54m/s
2
N.W./G.W.:
36kg/38kg
