ElektroPhysik MiniTest 725 Скачать руководство пользователя страница 60

Страница: 60 / 85

13.

MiniTest 725, MiniTest 735, MiniTest 745

60 / 85

to make your selection and press OK to confirm. If you set to the

wrong power source, the battery indicator and the automatic low

voltage switch-off will not work properly.

4. Button delay

The key reaction delay can be adjusted to the following options:

”OFF“, “1.0 sec“, “1.5 sec“, “2.0 sec“, “2.5 sec“, “3.0 sec“, “3.5 sec“,

“4.0 sec“, “4.5 sec“, “5.0 sec“.

To prevent the gauge from unintentional switch ON or OFF, you can

adjust the ON/OFF button to the above key reaction delay times. If, for

instance, you have adjusted a delay time of “2,5 sec”, the ON/OFF

button must be pressed for 2.5 seconds to switch the gauge ON or

OFF. Use arrow up/down keys to adjust the requested delay time.

Press OK to confirm. Please note that the ON/FF key will respond with

the set delay accordingly.

Содержание MiniTest 725






















































































Результаты поиска

Содержание MiniTest 725

Отзывы:

ElektroPhysik MiniTest 725, Техническое руководство и инструкции по эксплуатации, Страница: 60 / 85

Результаты поиска

Содержание MiniTest 725

Отзывы: