ElektroPhysik MiniTest 725 Скачать руководство пользователя страница 44

Страница: 44 / 85

MiniTest 725, MiniTest 735, MiniTest 745

44 / 85

To complete the batch setting procedure, an overview of your

parameter settings appears on screen.

For your quick reference, this overview can also be selected via the

main menu. Select “data base” followed by “overview” (see section

7.2.5).

With all predefined calibration methods with the exception of “factory”

and “manual”, the following message will appear after the batch settings

procedure: “Invalid calibration – Recalibrate ?”. At this point you can

decide whether recalibration should be made now or later during

measurement.

7.2.3 Select a batch for taking readings

Press function key MENU and select “Database”. Press OK to confirm.

The currently active batch is marked by an arrow.

Use up/down arrow keys to select the requested batch. Press OK to

confirm.

Your selected batch is now active. The display shows name of batch,

date and time of batch setting and the last modification. You can select

from the following options: change, overview, delete.

If there are no parameter changes are to be made, you can directly

proceed on measurement. Place the sensor onto the measuring object.

The gauge changes to measuring mode and the reading you have

taken is being displayed.

7.2.4 Change a batch

Press function key MENU and select “Database”. Press OK to confirm.

The currently active batch is marked by an arrow.

Use up/down arrow keys to select the requested batch. Press OK to

confirm. Select “change” and press OK to confirm. The parameter

setting procedure will be launched (see section 7.2.2). You can view the

Содержание MiniTest 725






















































































Результаты поиска

Содержание MiniTest 725

Отзывы:

ElektroPhysik MiniTest 725, Техническое руководство и инструкции по эксплуатации, Страница: 44 / 85

Результаты поиска

Содержание MiniTest 725

Отзывы: