elektronik star 10004911, Руководство пользователя

Страница: 7 / 10

Parts Identification
1. Control Panel 2. Water inlet
3. Lint Filter 4. Pulsator
5. Wash Tub Lid 6. Outer Case
7. Spin Tub Lid 8. Spin Tub
9. Power Cord 10. Plastic Spin Mat
11. Drain Hose
Chief technical date
Model
Rated input power Rated power
supply
Energy effiency grade: 5 Dimension Net weight Input Water pressure
Mpa
Wash clean rate: ≥0.7
Wash Spin Volta
ge
Freq. Consume electricity
(KW/cycle/kg)
Consume water
(L/cycle/kg)
LengthxWidth
xHigh
XPB68-
2000S
360W 160W 220V 50Hz ≤0.03 ≤36 715x455x830
(mm)
17kg 0.05~0.3
XPB75-
2001S
360W 160W 220V 50Hz ≤0.03 ≤36 795x455x865
(mm)
20kg 0.05~0.3
Installation
Electrical Connection
 he unit is designed to operate from an adequate power supply mentioned in the rating label sticked
at the back of the washing machine.
 The power cord plug must be connected to an earthed 3-pin power point.
 If the power cord is damaged, it should be replaced by an appointed qualified technician from the
manufacturer/distributor fo this product.
Connection of Water Inlet Hose
 Attached the water inlet hose to the water inlet (please refer to Parts Identification for the location).
Caution: Please use water below 50°C.
 The drain hose should be placed flat on the ground. Water flow will be blocked if any portion of the
drain hose is raised 20 cm (8 inches) from the ground.