ELEKTRO PARTNER TwinProbe, Руководство пользователя

Страница: 41 / 50

Proceed as follows:
•
Connect the negative pole of the battery clamps (black clamp) to the
vehicle's mass.
• Connect the mass cable's clamp to the battery.
• Connect the mass cable's terminal to the device that you wish to test; using,
if necessary, the accessories supplied.
•
Connect PWM 5 V terminal to the device that you wish to test; using, if
necessary, the accessories supplied.
•
Follow the instructions supplied by the software.
•
Start mode PWM 5 V through the software.
Cables with code 3903843 and 3901575 are part of the cables kit for
signal generator (optional).
40